Skip to content
high frequency finned tube Murphyhigh frequency finned tube Murphy
Murphy high frequency finned tube scaledMurphy high frequency finned tube scaled
Murphy high frequency finned tubes scaledMurphy high frequency finned tubes scaled

High frequency finned tube

Fin Type: High frequency finned tube

Tube Material: Carbon steel, stainless steel, copper, aluminum

Fin Material: Copper, aluminum

Fin Tube Length: No Limit

Product description: High-frequency finned tube works with high-frequency power source as a heat source, the steel strip, steel pipe heating at the same time, so that they melt into one. It has the characteristics of high heat transfer and heat dissipation efficiency, large heat transfer area, long service life, wide adaptability to temperature and high pressure.

High frequency finned tube

The basic principle of finned tube is to take the seamless steel tube on the outer packing band with a certain distance (strip perpendicular to the outer surface of the tube) and high-frequency current welding as the heat source. By using the skin effect and electrical effect of high-frequency current, the local heating tube, the steel strip and the contact surface area to be welded can be plastically welded. At the same time, the forging force of finned tube is applied to the metal oxide and the plastic form of the contact outside of the excess melt, so as to realize the combination of solid atoms between the steel tube and the finned material

High frequency finned tubes features

The high-frequency welding finned tube uses the skin effect and proximity effect of the high-frequency current to heat the steel strip and the outer surface of the steel tube while the steel strip is wound around the steel tube until it is in a plastic state or melted. Under a certain pressure of winding the steel strip Finish welding. This high-frequency welding is actually a solid phase welding. Compared with inlay, brazing (or overall hot-dip galvanizing) and other methods, it is more advanced in terms of product quality (high fin welding rate, up to 95%), productivity and automation .


(1) High production efficiency, continuous winding production; 

(2) Low cost, it depends on the characteristics of high-frequency welding itself — skin effect heating workpiece surface, to achieve the purpose of welding, welding process does not need to add any filler metal materials;

 (3) Since the high-frequency current only passes on the shallow surface of the steel tube, the welding heat affected zone is small, so the additional wall thickness caused by this need not be considered in the design calculation; No heat treatment is required after the workpiece is welded. 

(4) Solid welding, in the equipment configuration reasonable, process parameters perfect under the circumstances, can achieve between the fin and steel pipe welding firm, can withstand frequent open, shutdown caused by the thermal shock wave.

High frequency finned tube specifications

Product specification: ∮ 25-219mm


Fin thickness: 0.8-2.5mm


Fin pitch: 4-35mm


Fin width: 10-25mm

Effective welding length: ≤15 m

Bending radius of finned tube: 50-300mm

Finned tube welding rate: more than 95%

High frequency finned tube Material Standard

Fin material: Aluminum 1060, 1050, 1070, 6063,6061,3003

High frequency finned tube applications

High frequency welding fin tube is widely used in petrochemical, machinery, metallurgy, rubber, printing and dying, medicine, food, power plants, passenger cars, drying and other industrial heating and cooling, is the convection section of cracking furnace, transform furnace, heat exchanger, air preheater and economizer, crystallizer, radiator, and the optimal heat transfer of heat pipe technology components. The advantages of high frequency welded fin tube, especially the steel fin radiator is widely used in office buildings, residential buildings, hotels, workshops and other industrial and civilian construction industry, with good heating effect, is the traditional cast iron, plate radiator replacement products.



Get in Touch